| Clock Oscillators | |||||||||||||
|
T2000
Clock Oscillator
Plastic, SMD, J-Lead Package |
|||||||||||||
![]() |
|
||||||||||||
| Symbol | Unit | Min. | Typ. | Max. | ||||
| 5 V | 3.3 V | 5 V | 3.3 V | 5 V | 3.3 V | |||
| Center Frequency(1) |
fo
|
MHz | 1.5 | — | 75 | |||
| Operating Temp. Range |
T
|
°C | -20, -40 | — | 70, 85 | |||
| Frequency Stability(2) | — | ppm | — | — | ±50, ±100 | |||
| Supply Voltage |
VDD
|
VDC | 4.5 | 2.97 | 5.0 | 3.3 | 5.5 | 3.63 |
| Supply
Current 1.5MHz to 20MHz 20MHz to 75MHz |
IDD
|
mA mA |
— |
— |
15 50 |
10 35 |
||
| Output
Levels (CMOS) Output High Output Low |
VOH VOL |
V V |
4.5 |
2.97 |
— | 0.5 |
0.33 |
|
| Transition
Times(3) Rise & Fall Time (1.5MHz to 20MHz) Rise & Fall Time (20MHz to 75MHz) |
TR/TF | ns ns |
—
|
— |
8 5 |
10 6 |
||
| Output Symmetry(4) | SYM | % | 40 | 49/51 | 60 | |||
| Fanout(5),(6) |
—
|
— | — | — | 10TTL/15pF | |||
| Storage Temperature | — | °C | -40 | — | +125 | |||
| Tri-State
(Input to Pin 1) Output Active Output in High-impedance State |
Tri-State Tri-State |
V V |
4.0 |
2.0 |
— | 0.8 |
0.5 |
|
| (1) See
table below for standard frequencies available (2) Inclusive of calibration at 25 °C, operating temperature range, input voltage variation, load variation, aging, shock and vibration. (3) Transition times are measured between 10% and 90% of VDD, with an output load of 15pF. (4) 45/55 Symmetry available. (5) -40 to +85 °C, 10LSTTL only. (6) 50pF output load available |
||||||||
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
|||||||
![]() |
|||||||
|
|
|||||||
![]() |
|
||||||||||
|
|
|||||||||||
|
Crystal
| Clock Oscillators | VCXOs
| TCXOs | VCTCXOs
| Crystal Filters |
|||||||||||
|
Copyright © 1997-2000 Tellurian Technologies, Inc. All Rights Reserved. |
|||||||||||